Due to its excellent performance, speed regulating motor Brushless Gear Motor has been widely used in iron and steel, power stations, cable, chemical, oil, water, mud, textile, printing and dyeing, paper making, machinery and other industrial sector as a constant torque or decreasing the load torque mechanical stepless speed regulation, especially suitable for a great changing flow pump and fan class load moving in, can obtain good energy saving effect.
Adjustable speed motor common faults:
1. The main engine rate of revolution cyclical downturn
Appear this kind of circumstance, most are caused by mechanical parts fault happened, the adjustable speed motor rubber roller is more, every rubber roller bearings to support the move.
If a root any end of the roller bearing fault happens, 12v Dc Motor High Torque Low Rpm can make the speed of the host cyclical peak, serious when, the host will move more setbacks, must be the replacement bearing.
In addition, should pay attention to host the drum (including plate, rubber, impression cylinder) of the bearing and lubrication parts work is normal, in the event of failure will also affect the printing speed.
2. Is abnormal main drive motor, bearing heating
Main drive motor operation is not normal slip in the process 24v Dc Motor With Gearbox of operation will be violent vibration, bearing heating.
Apart clutch armature and rotor of the magnetic pole, to check the motor bearings are serious lack of lubricating grease, bearing caused by serious wear and tear, the operation performance of the motor.
At this point need to replace the damaged bearing, and infuse Parallel Shaft Gearbox lubricating grease. Under normal circumstances, to deal with this part of the organization of all the parts on a clean, come on, in order to ensure the normal operation of the main drive motor.
Servo reducer is the comparison of the structure is compact, return small gap, high precision, long service life, rated output torque can do a lot. But the price a little expensive. Planetary gear reducer is generally used in the limited space need high torque, small volume big torque, and its reliability and life are better than the spur gear reducer. Spur gear reducer is used in low current consumption, low noise and high efficiency, low cost applications.

Geared motor is generally used in low speed torque transmission machine, ordinary electric reducer can have several gears to achieve the ideal effect in the same laws, small gear and small gear tooth number ratio, is the transmission ratio. Reducer industry has been developing constantly, more and more equipments to the reducer.
Geared motor function has the following several aspects:
1. Reduce speed and increase the size of the output torque 12v High Torque Motor force, the proportions of the torque output by the motor output rate by reducing, but must be careful, can't exceed the speed reducer rated torque, otherwise may damage the reducer.
2. Reduce speed as well as to reduce the load moment of inertia, moment of inertia of the decrease of reduction ratio of the square.
The low power of the geared motor can do 0.5 W, 3 v voltage, micro reducer reducer diameter of 3.3 mm, with small size, light weight, low noise, gear and durable, long service life, large torque and speed range is larger, reducer is now widely used in the field of in the field of intelligent household, medical equipment, automobile industry, electronics, intelligent robot industry, household appliances, personal care tools such as scenario;
1. Intelligent household areas: general application in the automatic curtain, automatic intelligent of the robot, family type flip trash can, electronic, automatic shutter door, home video machine, drying machine, intelligent clamshell toilet, etc.
2. The robot industry: generally used in robot voice interaction, Planetary Gear Motor children education robot, sweep the floor machine, robot, intelligent robot adaptability, independent motor, intelligent medical robot project.
3. Precision medical equipment industry: widely used in the insulin pump gear box, smart fluids flow controller, intelligent motor, African hand massage massage shoes, minimally invasive linear cutting anastomat, self-congealing knife in equipment project such as gear box motor.
4. The car drive field: widely used in automobile tail door motor, 24v Gear Motor electric window-adjusting motor, electric draw stem and pull the tail door motor, car headlights, car wiper motor, rearview mirror adjustment, skylight regulating motor, car drive components, such as electronic parking brake system.
5. Electronic products and personal care devices: widely used in mobile phone front-facing camera rotation motor, beauty instrument, nano hydrating instrument motor, electric toothbrush, automatic curlers motor, smart mouse, intelligent electric rotating yuntai electrical items such as equipment products.

The micro gear motor normal use there is no problem. If long time don't use correctly, deceleration motor will be damaged or destroyed. Then when is it damage reducer?
Start to move over and over again in a short time, due 12 Volt Motor With Gearbox to the micro reducer at startup, shut down when the current is larger, if repeated over and over again in a short time by gear motor startup and shutdown is easy to burn (especially large-scale reducer, starting current is big, easy to burn). If the micro gear motor stuck can't continue to run in the running, micro reducer will generate a lot of calories, burned.
If three-phase deceleration motor running under the condition of the three-phase voltage is not stable, can also cause reduction motor burn out.
Micro gear motor into the water, on the micro reducer caused great damage. In simple terms, if the micro reducer, the water can appear internal short circuit, then the micro reducer burn out (can be placed in dry and ventilated place, dried up the water, try).
Micro gear motor overload, we know that overload operation can High Torque 12v Dc Motor lead to a lot of heat, and over time will burn out the micro reducer.
Due to its excellent performance, speed regulating motor has been widely used in iron and steel, power stations, cable, chemical, oil, water, mud, textile, printing and dyeing, paper making, machinery and other industrial sector as a constant torque or decreasing the load torque mechanical stepless speed regulation, especially suitable for a great changing flow pump and fan class load moving in, can obtain good energy saving effect
Variable frequency speed regulating motor is change the frequency Vending Machine Motor of the motor stator power, to change its synchronous speed control method. Variable frequency speed regulation system is the main equipment to provide frequency conversion power of inverter, the inverter can be divided into ac - dc - ac frequency converter and ac - ac frequency converter two kinds big, domestic use mostly pay - direct - frequency converter.

Deceleration speed regulating motor is used to change the series, the method such as voltage, current, frequency change speed of the motor, so that an electric motor to achieve high performance.
Due to its excellent performance, speed regulating motor has Micro Gear Motor been widely used in iron and steel, power stations, cable, chemical, oil, water, mud, textile, printing and dyeing, paper making, machinery, etc., in the process of mechanical manufacturing, can widely use of different methods of speed, large area to make the resistance of the speed change motor itself. So let us together to know about the characteristics of slow speed regulating motor.
1, the pressure regulating speed
In regulating speed control, able to transfer all of the energy use, feedback to achieve higher efficiency, so it makes it more saving on the use of the machine, in spite of this kind of machine in regulating speed control, can play out power is low, but that does not affect its normal operation. 2, the speed regulating pole change motor
In the speed regulating pole change motor, it won't have any Low Rpm Electric Motor loss of excitation, so efficiency is very high, when workers to control circuit is also very simple, even if there is a problem, need maintenance is also very easy, and the price is very low, with customized pressure regulating or slip clutch to cooperate with the battery, can make smooth speed gets higher efficiency.
3, electromagnetic speed adjustment
Deceleration speed regulating motor at the time of this part of work, Gear Reduction Motor although relatively more simple to operate, but its structure itself is very simple, all of the control device can accommodate the quantity is very few, so the price is really cheap, in the process of operation, we can trust, even to the maintenance is easy, and there won't be any harmonic interference.
4, and other characteristics
Slow speed regulating motor in the process of operation, a lot of the time may have no way to good finish the homework as within limited range, and technology, if not a professional might think that is more complex, but most of the time if familiar with it is better able to use them.

Deceleration motor speed selection principle is to make it as close as possible to the speed of the production machinery. General import is much more expensive than domestic, economic choice. Take some more expensive than the mainland of Hong Kong, Macao and Taiwan.
Depending on the specific enterprise needs) whether micro gear motor imported or domestic most of the manufacturers have their own naming conventions, reducer on the market for now.
So find a gear motor samples, according to the sample selection. Gear motor has a cage type and line around the two types of choice.
Cage type gear motor has simple structure, easy maintenance, low prices. Generally no load or light load starting of production machinery can choose, small starting current.
Wire wound deceleration of the motor starting torque. But the structure is complex, starting and maintaining more troublesome, used only to need the place of big starting torque, such as lifting equipment, moreover can also be used to need a good speed regulation of mechanical equipment.
The choice of gear motor power is decided by production machinery Small Geared Motors that is to say, the power of choice. Determined by the power needed for the load. Deceleration motor required with the following formula: power motor power = torque present 9550 power input revolutions present speed ratio coefficient of present use.
In regulating speed control, able to transfer all of the energy use, feedback to achieve higher efficiency, so it makes it more saving on the use of the machine, in spite of this kind of machine in regulating speed control, can play out power is low, but that does not affect its normal operation.
In the speed regulating pole change motor, Small Dc Gear Motor it won't have any loss of excitation, so efficiency is very high, when workers to control circuit is also very simple, even if there is a problem, need maintenance is also very easy, and the price is very low, with customized pressure regulating or slip clutch to cooperate with the battery, can make smooth speed gets higher efficiency.

With the widely application of the reducer in the machinery industry, we need to strengthen the understanding of reducer of common sense, only in this way can we better for operating speed reducer.
Methods/procedures:
Pay attention to the speed reducer of the construction of gear reduction motor the installation site. The installation of the speed reducer, the ground flat requirement, ventilated condition is better, as far as possible to know the installation site of the use of the reducer has a great influence in the future.
To pay attention to the daily maintenance of reducer, don't use, no maintenance, this is the big fear of reducer using, good equipment, no maintenance, his life will fall by at least a third.
So daily maintenance is particularly important, reducer daily maintenance includes: the use of lubricating oil replacement, check whether the install base, seal, shaft normally, shell in addition to dirt effectually, and other important parts of the maintenance.
Gear box of gear case of machine cleaning maintenance using small geared motors the original to the discharge of oil system and after filtering the old oil can be realized in the gear box, waste oil, cleaning rapid filtration, inject new oil, and other functions, process does not change the hardware facilities, do not add detergent, ensure the safety of the gear box operation, prolong service life.
Attention should be paid to brushless gear motor the maintenance of the reducer during outage. Reducer deactivated during user don't ignore, like cars, open every day no problem, but if one year, no matter, don't ask, don't let the sun may would like to open again, is to the car repair shop. Reducer during idle, attention should be paid to in accordance with the requirements of the specification, regular inspection and maintenance, again, to ensure that boot box, not out of the accidental failures.